Hollow Point Racing  


Instagram

-- WELCOME TO HOLLOW POINT RACING --    --
Go Back   Hollow Point Racing > The Garage > The Track

Reply
 
Thread Tools Display Modes
Old 08-20-2012, 03:07 PM   #1
BADASS03SVT
Shit is No Joke
 
BADASS03SVT's Avatar
 
Join Date: Oct 2008
Location: MA
Posts: 1,102
Default PB - 9.17 @ 149, 2nd pass on motor

This L&M built motor and TVS combo just keeps on impressing me!

Last day I raced was July 4th and I made 1 full pass with the car which resulted in

60' - 1.38
1/8 - 5.91 @ 117
1/4 - 9.28 @ 147

Sunday I finally got the car to the track again although as I was taking it out of the trailer I had a feeling I was going to have an "issue". So I went up for a pass and decided to just footbrake the car. Held it at about 2 grand and dropped it on the first pass.

60' - 1.44 (LOL)
1/8 - 5.88 @ 119
1/4 - 9.17 @ 149

WOW. No changes from July 4th except I tighten up the rear shocks. Same tune with 20psi and 16 timing. Just a bit cooler weather.

As I figured though I had an issue. When I tried to roll the car back off the trailer it wouldnt move. Took some decent force but then seemed to roll fine. However.....the story was told in the shutdown area when I had some slight brake fade and when I got down to about 60mph I got a loud squealing sound. Got back to the trailer and peeked at the rear brakes and the rotors were purple. So for some reason my rear calipers are being held up. Tried them again in the pits and seemed ok, car rolling, fluid in master good etc. I decided to try just an 1/8 pass to work on the cars 60' and shift points in hopes the brakes didnt bind and heat up the rotor again.

I decided to try a low 2 step setting this time and see what happened and the car left hard.

60' - 1.34
1/8 - 5.81 @ 120

I let out and coasted to a 9.48 @ 115

anyone want to do that math on that 1/8 to 1/4? Coulda been a 9.10 @ 150! Next time....once I get some seat time and the 60' to a 1.29 hello 8.99 on a 2.3 TVS!

No vids but a couple pics


__________________
Jake
Silver '03 Cobra Coupe Auto - The First Eaton 03/04 into the 9's!
9.82@135 w/ a 1.35 - OEM Longblock, NO Nitrous!

Fastest Eaton / n2o Cobra in the world...
9.46 @ 140 w/ a 1.35

NOW - Teksid, 10.5:1, TVS @ 20psi
9.11 @ 148 w/ a 1.30

**Click here for all my video's!!!**

BADASS03SVT is offline   Reply With Quote
Old 08-20-2012, 08:16 PM   #2
2001Bullitt
I <3 Corn
 
2001Bullitt's Avatar
 
Join Date: Dec 2010
Location: Lowell, Massachusetts
Posts: 627
Default

I made it just in time to catch your last run. Car is great man. Nice and clean too. BTW I am the one who came over to talk before you took your dog for a leak lol
__________________

2001 Bullitt #1701.... Borla Stinger exhaust, 70mm Turbo,UPR k-member,UPR lower front control arms, UPR coilover kit, UPR bumpsteer and rack bushings, UPR caster/camber plates, steeda rear lower control arms, SLP line lock, MGW shifter, 10.5 Black bullitts, 373s, SCT tuned, Anderson F52 blower cams, yada yada 373Hp/393Tq on 6lbs.....

1997 Jeep Cherokee. 4.0 5-spd 3inch lift on 31s. 224k and still going stong! Ford Fuel injector mod, high flow cat, magnaflow exhaust, FOR SALE!!!
2001Bullitt is offline   Reply With Quote
Old 08-20-2012, 10:18 PM   #3
mellis
Fackin destroying tires
 
mellis's Avatar
 
Join Date: Jul 2009
Location: Worcester, MA
Posts: 1,833
Default

Damn dude, things a rocket ship!
__________________
2004 Torch Red GT
On3 Turbo upgrade in process...
mellis is offline   Reply With Quote
Old 08-21-2012, 09:45 AM   #4
BADASS03SVT
Shit is No Joke
 
BADASS03SVT's Avatar
 
Join Date: Oct 2008
Location: MA
Posts: 1,102
Default

Quote:
Originally Posted by 2001Bullitt View Post
I made it just in time to catch your last run. Car is great man. Nice and clean too. BTW I am the one who came over to talk before you took your dog for a leak lol
sorry man....was a busy day with the new pup....I saw the shirt just didnt know ya. Pup was crazy all day with new people, sights and sounds.
__________________
Jake
Silver '03 Cobra Coupe Auto - The First Eaton 03/04 into the 9's!
9.82@135 w/ a 1.35 - OEM Longblock, NO Nitrous!

Fastest Eaton / n2o Cobra in the world...
9.46 @ 140 w/ a 1.35

NOW - Teksid, 10.5:1, TVS @ 20psi
9.11 @ 148 w/ a 1.30

**Click here for all my video's!!!**

BADASS03SVT is offline   Reply With Quote
Old 09-08-2012, 10:51 PM   #5
BADASS03SVT
Shit is No Joke
 
BADASS03SVT's Avatar
 
Join Date: Oct 2008
Location: MA
Posts: 1,102
Default 9.11 @ 148 w/ a lil wheelie

Went to the 1/4 Friday night and the 1/8 today to work on the 60s. Still base tuneup, 20psi yadda yadda. Air was so so friday night around 1300 feet.....today at the 1/8 it was in the 1800 range. Had the chute put on this week too and they adjusted my pinion and shocks to what they wanted to see. Went a 9.21 @ 148 the first pass. Took one click out of the rear shocks and this happened next pass. I had NO video and luckily someone posted this on my FB page today....

Wasnt expecting this!

[video=facebook;3876163257178]http://www.facebook.com/photo.php?v=3876163257178&notif_t=video_comment_tagged[/video]


that was a

1.30
5.81 @ 118.98
9.11 @ 148

a couple weeks ago I went 5.81 @ 120.xx in better air on a 1.34 so that shows how bad the air was.

Today at the 1/8 I changed a couple things but was bracket racing so didnt go too crazy. 60s were all over the place but I did get a slip with a 1.28 60'!!! It went 5.84 @ 118 on that pass steering it. So still making progress.... pics of chute (Thanks Harold...lol)


__________________
Jake
Silver '03 Cobra Coupe Auto - The First Eaton 03/04 into the 9's!
9.82@135 w/ a 1.35 - OEM Longblock, NO Nitrous!

Fastest Eaton / n2o Cobra in the world...
9.46 @ 140 w/ a 1.35

NOW - Teksid, 10.5:1, TVS @ 20psi
9.11 @ 148 w/ a 1.30

**Click here for all my video's!!!**

BADASS03SVT is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -5. The time now is 12:15 PM.

Official PayPal Seal

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.